Kent 3-Axis CNC Bed Mill 12" x 50" with Acu-Rite G2 CNC Control - TW-32QI-A
Features:
- 7.5 HP spindle motor
- Programmable spindle rpm control
- Spindle rpm over-ride knob on control
- 60-6000 RPM without manual gear changes
- NST-40 or CAT-40 taper spindle available
- Enhanced flux-vector inverter on spindle drive
- Metal hand wheels on X-axis and Y-axis
- Full automatic CNC and manual/DRO mode capability
- Solid boxed ways on column and saddle ways
- Metal telescoping way cover on front Y-axis
- Auto lubrication unit with metered check valves
- Flood coolant with splash guard and chip pan
- Built-in coolant reservoir in machine base
- Overhead arm mounting of CNC control
- Halogen work light built-in for convenience
- DRO mode for manual machining capability
- Large 1.25” diameter precision ground ball screws
- Manual quill capability for greater flexibility
Complete with:
- Automatic Lube System
- Drawbar for CAT-40 Collets
- Metal Telescoping Front Way Cover & Rubber Rear Way Cover
- Electronic Variable Spindle Speeds (Programmable via CNC Control)
- Hardened & Ground Square Ways
- 3-Axis Acu-Rite CNC Control
- Manual & Parts List for Mill
- Complete Operation Manual for CNC COntrol
Specifications:
| Model | TW-32QI |
| Table Size | 12" x 50" |
| Table Travel (X-Axis) | 34" (32" w/ control) |
| Saddle Travel (Y-Axis) | 20" (18.5" w/ control) |
| Knee Travel (Z-Axis) | 20" (18.5" w/ control) |
| Spindle Center to Column | 20" |
| Spindle to Table | 4" to 24" |
| Quill Travel | 5.5" |
| Quill Diameter | 4.173" |
| T-Slots (number x width) | 3 x 5/8" |
| Coolant Pump | 0.25 HP |
| Spindle Motor | 7.5 HP |
| Spindle Taper | NST-40 or CAT-40 |
| Speed Range | 60 - 6000 RPM |
| Quill Power Feed (per rev) | 0.0017" / 0.0032" / 0.0054" |
| Drilling Capacity (Manual) | 1.25" |
| Drilling Capacity (Power) | 0.625" |
| Boring Capacity | 8" Diameter |
| Milling Capacity | 2.5 in3 /min |
| Maximum Work Load | 1000 lbs. (distributed) |
| Net Weight | 4300 lbs. |
| Gross Weight | 5000 lbs. |
| Packing Dimension | 72" x 86" x 88" |
| Power Requirements | 220 volts, 60 Hz, 3-phase, 30 Amps |
See all Kent 3-Axis CNC Bed Mills with Acu-Rite G2 or Fagor 8055i CNC Control
Kent 3-Axis CNC Bed Mill 12" x 50" with Acu-Rite G2 CNC Control
