Scotchman SUP-500-NF Non-Ferrous Upcut Saw - SUP-500-NF
Non-Ferrous Upcut Saw designed for Aluminum, PVC, Copper, etc.
Standard Features:
- Precision Miter Upcut Non-ferrous Saw
- Includes Blade- 120 TPI Carbide
- Safety Hood with Safety Switch that will not Allow Saw to Run with Hood Open
- Blade Door with Safety Interlock Switch
- Dual Palm Buttons
- Adjustable Feed Rate on Saw Head
- Two Horizontal Pneumatic Clamps
- Two Vertical Pneumatic Clamps
- Miter Capability 30° Left, 90° Striaght, 0° Right
- Capable of Slotting
- Moveable Back Fence for Larger Capacity
- Coolant Tank with Mist Lubrication
- One Gallon Concentrated Coolant
- One 20" (500 mm) Diameter, 120-Tooth Carbide Blade
- One Blade Wrench
- Air Hose
- Base Designed as a Chip Collection with Two Chip Extraction Ports
- Noise Level (DB 68)
- Adjustable Leveling Pads
- 230 or 460 volt/3-ph Electrics (must Specify Voltage)
- Warranty: Three Years on Parts
- Made in Spain
Capacities / Specifications:
| 90 Degree | 45 Degree | |
| Round | 7" (180 mm) | 6" (150 mm) |
| Square | 6" (150 mm) | 4-3/4" (120 mm) |
| Rectangle | 11-3/4" x 5" (300 x 125 mm) | 5-3/4" x 4-3/4" (145 x 120 mm) |
| Cutting Speed | 3,000 RPM |
| Motor Rate | 5.5 HP |
| Factory Wired | Specify: 230 3-ph / 460 3-ph |
| Maximum Diameter Blade: | 20" (500 mm) |
| Arbor Bore | 1.97" (50 mm) |
| Width: | 47-1/4" |
| Depth: | 43-3/8" |
| Height: | (Top of Hood) 60-1/4" |
| Height: | (From Floor to Vise) 38-5/8" |
| Shipping Weight: | 1,069 lbs. (485 kg) |
See accessories for Scotchman SUP-500-NF Non-Ferrous Upcut Saw
Scotchman SUP-500-NF Non-Ferrous Upcut Saw
