The three stage planetary gearbox offers a reduction ration of 93: 1, yielding the ideal speed of 200-250 RPM (depending on the AC adapter used).
Torque control up to 18 in. lbs.
The clutch is adjustable in the range of 3 in-lbs. to 9 in-lbs. in 5 steps.
An ideally positioned switch provides on/off/reverse. Fiberglass reinforced nylon lends high impact resistance to the housing.
A chuck facilitates acceptance of all bit shanks, including 1/4"
The tool operates of 12-16V DC. The rear mounted metal hook is optimal when using the optional balancer.
Includes 16 bits: Flat Bits .012" x .06", .014" x .08" and .016" x .1" (0.3 x 1.5, 0.35 x 2.0 and 0.4 x 2.5mm). Torx T6, T8 and T10, Phillips sizes 0 and 1, allen key 1.5 - 2.0 and 2.5mm and 3.0, 3.5, 4.0, 4.5 and 5.0mm nut drivers. All with holder.
#28-699 Load Balancer - This easy to install balancer helps keep your workbench clean. Load capacity 0.6-1.3 lb., cord length to 70". Housed in a sheet steel case with plastic coating. Weight approx. 0.0 lb. and size approx. 9" x 4" x 1-1/2".
Made in Germany.
Torque control up to 18 in. lbs.
The clutch is adjustable in the range of 3 in-lbs. to 9 in-lbs. in 5 steps.
An ideally positioned switch provides on/off/reverse. Fiberglass reinforced nylon lends high impact resistance to the housing.
A chuck facilitates acceptance of all bit shanks, including 1/4"
The tool operates of 12-16V DC. The rear mounted metal hook is optimal when using the optional balancer.
Includes 16 bits: Flat Bits .012" x .06", .014" x .08" and .016" x .1" (0.3 x 1.5, 0.35 x 2.0 and 0.4 x 2.5mm). Torx T6, T8 and T10, Phillips sizes 0 and 1, allen key 1.5 - 2.0 and 2.5mm and 3.0, 3.5, 4.0, 4.5 and 5.0mm nut drivers. All with holder.
#28-699 Load Balancer - This easy to install balancer helps keep your workbench clean. Load capacity 0.6-1.3 lb., cord length to 70". Housed in a sheet steel case with plastic coating. Weight approx. 0.0 lb. and size approx. 9" x 4" x 1-1/2".
Made in Germany.
