Precision Gearhead Lathe 14" x 40" - KGY-1440GH
- No change gear in tool box
- The thread category complete, not only cutting metric thread and imperial thread, but also cutting diametric thread and module thread.
- Minimum Cross feed 0.01mm/rev, Minimum Longitudinal feed 0.046mm/rev
Standard Accessories for KGY-14 / 16
- Reduction Sleeve 5/3#
- Center MT3#(Dead Center, Alloy Center)
- Three Jaw Chuck 160mm
- Four Jaw Chuck
- Chip Tray
- Splash Guard
- Tool Box & Tools 1set
- Face Plate
- Steady Rest
- Follow Rest
- Brake
- Coolant System
- Work Light
Optional Accessories:
- Quick Change Tool Post
- Taper Turning Attachment
- Live Center
- Drill Chuck
- Chuck Cover
- Tool Post Cover
- Lead screw Cover
- Driving Plate
Specifications:
| MODEL | KGY-1440GH |
| Swing over bed | 360mm(14") |
| Swing over cross slide | 224mm (8-13/16") |
| Swing in gap diameter | 502mm (19-3/4") |
| length in gap | 210mm (8-1/4") |
| Center height | 179mm (7") |
| Admits between | 750mm (30") or 1000mm (40") |
| Spindle bore | 38mm (1-1/2") |
| Spindle nose | D1-4 or D1-5 |
| Taper in nose | No 5 Morse |
| Speeds number | 8 |
| Speeds range | 70-2000 r/min |
| Cross slide travel | 170mm (6-11/16") |
| Compound rest travel | 95mm (3-9/16") |
| Lead screw thread | 8T.P.I. or 3mm pitch |
| Feed rod diameter | 19mm (3/4") |
| Cutting tool max section | 16mm×16mm (5/8"×5/8") |
| Threads imperial pitches | 42 Nos. 4-112T.P.I |
| Threads metric pitches | 44 Nos. 0.1-7mm |
| Threads diametric pitches | 25 Nos. 16-112DP |
| Threads module pitches | 34 Nos. 0.1-1.75MP |
| Longitudinal feeds imperial | 24 Nos. 0.00168-0.1175"/rev |
| Longitudinal feeds metric | 24 Nos. 0.046-3.249 mm/rev |
| Cross feeds imperial | 32 Nos. 0.00046-0.03231"/rev |
| Cross feeds metric | 24 Nos. 0.01-0.703 mm/rev |
| Quill diameter | 32mm(1-1/4") or 42mm (1-21/32") |
| Quill travel | 100mm (3-15/16") |
| Quill taper | No3 Morse |
| Main motor power | 1.5kW (2HP) |
| Coolant pump power | 40W (1/16HP) |
| Packing size (cm) | 168 ×76 ×153 (750mm) or 193×76×153 (1000mm) |
| NG/GW (kg) | 510/630 (750mm) or 540/645 (1000mm) |
Precision Gearhead Lathe 14" x 40"
