Mitutoyo Outside Micrometer, Non-Rotating Spindle Type, 3-4"/76.2-101.6mm - 406-353-30
This micrometer features a non-rotating spindle, and offers the following benefits:
- Sliding spindle, not rotating
- Ratchet stop
- Data output
Features:
- with a standard bar except for 0-25mm/0-1in model.
- With SPC output
- Supplied in a fitted plastic case.
Technical Data:
| Accuracy | Refer to the list of specifications |
| Resolution | 0.001mm or .00005"/0.001mm |
| Flatness | 0.3µm / .000012" |
| Parallelism | 3µm / .00012" for models up to 75mm / 3" 4µm / .000016" for models over 75mm / 3" 1.6µm / .000063" for models up to 50mm / 2" 2µm / .00008" for models over 50mm / 2" |
| Measuring faces | Carbide tipped |
| Display | LCD |
| Battery | SR44 (1 pc.), 938882 |
| Battery life | Approx. 1.2 years under normal use |
Function of Digital Model:
- Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
- Alarm: Low voltage, Counting value composition error
Optional Accessories for Digital Model:
- 05CZA662: SPC cable with data switch (1m / 40")
- 05CZA663: SPC cable with data switch (2m / 80")
Specifications:
| Range | 3 - 4 inch |
| Accuracy | 0.0002"/±4 µm |
| Mass | 460 g |
| Digital step | 0,001 mm |
| Flatness | 0,3 µm |
| Parallelism | 3 μm for models up to 75 mm 4 μm for models over 75 mm |
| Measuring surfaces | carbide-tipped, micro-lap finish |
| Measuring spindle | With spindle lock, ø 6,35 mm, spindle pitch 0,5mm |
| Measuring force | 3 - 8 N |
| Battery life | approx. 2.4 years |
| Delivered | Including box, setting standard (from 25 mm upward), key |
| ORIGIN | Yes |
| ZERO/ABS | Yes |
| Auto Power OFF after 20 min. non use | Yes |
| Low voltage alarm | Yes |
| Function lock | Yes |
| Data output | Yes |
| HOLD | Yes |
| Digital/Analog | Digital |
| Inch-Metric | Inch/Metric |
See all Mitutoyo Series 406 Outside Micrometers, Non-Rotating Spindle Type
Outside Micrometer
