Mitutoyo Digimatic Indicator Signal ID-C, 0.5" w/ Flat Back - 543-351B
This is an externally-powered Digimatic Indicator with a N-ch open drain –NG, OK, +NG output.
Features:
- Dust-protected and protected against splashing water, complying with IEC 60529 (equivalent to IP54)
- Measures MAX/MIN/RANGE (run-out value).
- Saves three different Preset and Tolerance settings.
- Fast measurement frequency mode (detection cycle 50times/s) for reliable measurement in the peak detection mode (MAX/MIN/RANGE)
- Calculation function Ax. Coefficient A freely definable, x = displacement of the plunger
- Analogue bar graph in the display (12 different scales switchable)
- GO/±NG tolerance judgment function
Specifications:
| Item Number | 543-351 |
| Range | 0.5 inch |
| Digital step | 0.00005"/0,001 mm |
| Accuracy | 0.00012"/0,003 mm |
| Accuracy | Refer to the list of specifications (excluding quantizing error) |
| Measuring force | ≤ 2,5 N |
| Scale | Capacitance type, ABSOLUTE linear encoder |
| Max. response speed | Unlimited |
| Stem Ø | 8 mm |
| Measurement frequency | 100 times/s(If the plunger speed >0,1 mm/s the peak value could not be displayed correctly.) |
| Contact point | Carbide ball, thread M 2.4 x 0.45 mm |
| Alarm | Counting value composition error, overflow error, tolerance limit setting error |
| Power supply | DC 5 - 24V |
| Display | LCD, character height 8 mm |
| Delivered | With signal cable 4 m. One end is fixed to the main unit. no connector is supplied for the other end. |
| Signal output (+NG, OK, -NG) | Yes |
| Signal input No-voltage input, (PRESET_RECALL/ZERO, HOLD_RESET) | Yes |
| PRESET (x3) | Yes |
| ZERO/ABS | Yes |
| GO/±NG judgement | Yes |
| ON/OFF | Yes |
| Analogue measuring range switchable | Yes |
| GO/±NG judgement via LED | Yes |
| Function lock | Yes |
| Counting direction switchable | Yes |
| Calculation function | Yes |
| GO/±NG judgement on LCD | Yes |
| MAX/MIN/RANGE | Yes |
| Inch-Metric | Inch/Metric |
Mitutoyo Digimatic Indicator Signal ID-C, 0.5" w/ Flat Back
