Mitutoyo Digimatic Electronic Caliper & Micrometer Set - 950-500

Brand:

(No reviews yet) Write a Review
SKU:
950-500

Mitutoyo

Mitutoyo Digimatic Electronic Caliper & Micrometer Set


# 500-196 Caliper

Range: 0 - 6" / 0 - 150mm
Accuracy: ±.001"
LCD Resolution: 0.0005" / 0.01mm

  • Large and clear LCD readout
  • The ZERO/ABS key allows the display to be Zero-Set at any slider position along the scale for incremental comparison measurements. This switch will also allow return to the absolute (ABS) coordinate and display of the true position from the origin point (usually jaws-closed point).
  • Data Hold Unit (959143) is optional
  • Supplied in fitted plastic case

Technical Data:

  • Accuracy: ±.001"
  • Resolution: 0.0005"/0.01mm
  • Repeatability: 0.01mm / 0.0005"
  • Display: LCD
  • Length standard: ABSOLUTE electrostatic capacitance type linear encoder
  • Max. response speed: Unlimited
  • Battery: SR44 (1 pc.), 938882
  • Battery life: Approx. 3.5 years under normal use

Function:

  • Origin-set, Zero-setting, Data output, inch/mm conversion
  • Alarm: Low voltage, Counting value composition error


# 293-340 Micrometer

Range: 0 - 1" / 0 - 25.4mm
Accuracy: ±.00005"
with ratchet stop, w/o SPC

Coolant Proof IP65-MX Micrometer

Twice as Long Battery Life as before and Drastic Improvement in Measurement Efficiency

  • IP65 protection level, enabling use in environments exposed to cutting oil, etc*.
    *Anti-corrosion treatment is required after use.
  • Measurement data output function is available with a water-resistant connection cable.
  • Auto power ON/OFF function.
  • Certificate of inspection* is included.
    (50mm/2" or less range models) *It is not the type used to obtain calibration certificates.
  • Supplied in fitted plastic case.

Technical Data

  • Accuracy: Refer to the list of specifications.
  • Resolution: 0.001mm or .00005"/0.001mm
  • Flatness: 0.3µm/.000012"
  • Parallelism: 1µm/.00004" for models up to 50mm/2"
    2µm/.00008" for models up to 100mm/4"
    3µm/.00012" for models up to 175mm/7"
    4µm/.00016" for models up to 275mm/11"
    5µm/.0002" for models over 300mm/12"
  • Measuring faces: Carbide tipped
  • Display: LCD
  • Battery: SR44 (1 pc.), 938882
  • Battery life: Approx. 1.2 years under normal use
    (8 months: over 100mm models)
  • Dust/Water protection level: IP65

Function:

  • Origin-set, Zero-setting, Automatic power on/off, Data hold,
    Data output, inch/mm conversion (inch/mm models)
  • Alarm: Low voltage, Counting value composition error
SET of Mitutoyo 500-196 Caliper & 293-340 Micrometer