ID: 325200
Mitutoyo ABSOLUTE Digimatic Indicator ID-C, 0.5"/12.7mm w/ Lug Back - 543-352
- With the max./min. value holding function, the signal ID-C can output the signal of the GO/±NG judgment result against the peak values set. Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.
- The signal can be output to an external device like a sequencer through the NPN open-collector.
- The GO/±NG judgment result is also indicated by the green/red LED and the "<, O, >" signs on LCD.
- Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.
- The Signal ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments.
Technical Data:
| Item Number | 543-352 |
| Model | ID-C112JEX |
| Range | 0.5in / 12.7mm |
| Accuracy | 0.00012in |
| Resolution | .00005in / 0.001mm |
| Type | ANSI/AGD type, Stem dia 3/8in, 4-48 UNF Thread |
| Display | LCD |
| Length standard | ABSOLUTE electrostatic capacitance type linear encoder |
| Max. response speed | Unlimited |
| Measuring force | 2.0N or less |
| Power supply | DC 12 - 24V±10% |
| Dust/Water protection level | IP54 |
| Function | Data output (–NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only) |
| Alarm | Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error |
ID: 325201
Mitutoyo ABSOLUTE Digimatic Indicator ID-C, 0.5"/12.7mm w/ Flat Back - 543-352B
- With the max./min. value holding function, the signal ID-C can output the signal of the GO/±NG judgment result against the peak values set. Substitute for the mechanical/electrical contact, the judgment is carried out by calculating the measurement data obtained. This provides high reliability with no deterioration of the contact point and volume adjustment.
- The signal can be output to an external device like a sequencer through the NPN open-collector.
- The GO/±NG judgment result is also indicated by the green/red LED and the "<, O, >" signs on LCD.
- Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.
- The Signal ID-C achieves the IP54 protection level to resist dust and contaminants for safe operation in harsh machine shop environments.
Technical Data:
| Item Number | 543-352B |
| Model | ID-C112JEXB |
| Range | 0.5in / 12.7mm |
| Accuracy | 0.00012in |
| Resolution | .00005in / 0.001mm |
| Type | ANSI/AGD type, Stem dia 3/8in, 4-48 UNF Thread |
| Display | LCD |
| Length standard | ABSOLUTE electrostatic capacitance type linear encoder |
| Max. response speed | Unlimited |
| Measuring force | 2.0N or less |
| Power supply | DC 12 - 24V±10% |
| Dust/Water protection level | IP54 |
| Function | Data output (–NG/OK/NG signal, NPN open collector), Remote control (hold-preset, preset-recall, zero-set), Origin-set/Preset, Zeroset, GO/±NG judgment, Max/Min/Runout value holding, Counting direction switching, Power ON/OFF, inch/mm conversion (on inch/metric models only) |
| Alarm | Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error |
