Milwaukee Motors for Electromagnetic Drill Press
No. 4253-1
Lightweight with ample power, the ½” Electromagnetic Drill Press Motor is ideal for drilling small holes into steel. At just 8 pounds, this lightweight 6.2-amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 pounds of drill point pressure with a 1-inch steel plate.
This unit features a ½” chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results.
- Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 600 RPM
- ½” Capacity: Taps up to 5/8-inch, 18-threaded holes. (5/8-11 and ½-13 taps are not recommended.)
- Maximum force: Develops up to 1650 pounds of drill point pressure with a 1-inch steel plate
Specifications:
- Weight: 8.0 lbs
- Voltage: 120V AC
- Tool Warranty: 5 Years
- Amps: 6 point 2
- Chuck or Taper: Chuck
- Drill Capacity 1/2"
- Drill Point Pressure: 1,610/1,650 lbs
- Tap Capacity: 5/8”-18
No. 4262-1
No job is too large for this heavy-duty drill press motor. Built for production drilling, this 11.5-amp drill motor can handle the toughest drilling jobs with up to a ¾” threaded hole capacity. The unit runs at 350 no-load RPM, geared low for maximum torque. It can produce up to 1670 pounds of drill point pressure with a 1-inch steel plate.
A ¾” chuck permits fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the larger 4203 adjustable base (sold separately) for the toughest applications.
- Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 350 RPM
- Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling
- 3/4” Capacity: Taps up to 1-inch, 14-threaded holes
- Maximum force: Develops up to 1670 pounds of drill point pressure with a 1-inch steel plate
Specifications:
- Weight: 21.0 lbs
- Voltage: 120V AC
- Tool Warranty: 5 Years
- No Load RPM: 0-350
- Amps: 11 point 5
- Chuck or Taper: Chuck
- Drill Capacity: 3/4”
- Drill Point Pressure: 1,630/1,670 lbs
- Tap Capacity: 1-14”
No. 4292-1
No job is too large for this heavy-duty drill press motor. Built for production drilling, this 11.5-amp drill motor can handle the toughest drilling jobs with up to a 1-¼” threaded hole capacity. The two-speed unit runs at 375 and 750 RPM, geared low for maximum torque. It can produce up to 1600 pounds of drill point pressure with a 1-inch steel plate.
This unit features a No. 3 Morse Taper Chuck, for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the larger 4203 adjustable base (sold separately) for the toughest applications.
- Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 350 RPM
- Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling
- 1-1/4” Capacity: Taps up to 1-inch, 14-threaded holes
- Maximum force: Develops up to 1600 pounds of drill point pressure with a 1-inch steel plate
Specifications:
- Weight: 23.0 lbs
- Voltage: 120V AC
- Tool Warranty: 5 Years
- No Load RPM: 0-750, 0-375
- Amps: 11 point 5
- Chuck or Taper: No. 3MT
- Drill Capacity: 1-1/4”
- Drill Point Pressure: 1,530/1,600 lbs
- Tap Capacity: 1-14”
For Use With Milwaukee Electromagnetic Drill Press Bases Click Here
