Marson SP160 Air/Hydraulic Rivet Nut Tool - M39225

The new Marson 160-SP Spin/Pull rivet nut setting tool is our most powerful air/ hydraulic rivet nut tool yet. Engage the rivet nut onto the mandrel, and the 160-SP automatically threads the fastener on the tool. Pressing and holding the trigger in position will set the rivet nut and reverse itself out automatically, all in one operation. This advanced tool features an adjustable stroke knob in the base of the tool to fully adjust stroke length to suit any grip range.

Included is a swivel air inlet for increased mobility. For added convenience, adjustments and changes are performed outside the tool, with no required tear down to adjust the stroke or change thread sizes. Comes supplied with either all inch (M39225) or all metric (M39226) mandrels and nosepieces conveniently stored in a durable carry case. Weight 6 lbs.

Benefits:

• Easy installation in seconds
• Fully adjustable stroke knob located outside the tool, no required tear down to adjust stroke or change thread sizes.
• Sets #6-32 through 1/2"-13 diameter threaded inserts

Features:

• The 160-SP Spin/Pull rivet nut setting tool is Marson's most powerful air/hydraulic rivet nut tool yet.
• Engage the rivet nut onto the mandrel, and the 160-SP automatically threads the fastener on the tool.
• Pressing and holding the trigger in position will set the rivet nut and reverse itself out automatically, all in one operation.
• This advanced tool features an adjustable stroke knob in the base of the tool to fully adjust stroke length to suit any grip range.

Includes:

• Comes supplied with all inch mandrels and nosepieces, #6-32 through 1/2"-13, conveniently stored in a durable carry case.