Kent Vertical Machining Center - KVR-2418
Features:
- AC hi-torque spindle motor dual wound high/low
- Spiral type chip conveyor
- All AC digital Servo motors (X, Y, Z) CAT-40 Taper Spindle
- Extra large roll out flood coolant system with automatic oil skimmer
- Full enclosure with extra wide opening and removable side doors
- Precision extra-side linear ways for smooth rapid traverse and high accuracy
- Halogen work light
- Oversized C-3 grade precision ground ball screws
- 10,000 RPM hi-performance spindle with spindle chiller
- Certified Meehanite castings with heavy duty extra wide linear guide ways and six carrier blocks
- Auto lubrication unit with metered check valves
- Direct coupled Servo motors for ultra precision
- Fanuc 0i-MD 3-axis CNC control with 8.4" color monitor with 2 gig flash drive and Ethernet
Complete with:
- Automatic Lubrication
- Automatic Tool Changer
- Manual & Parts List for Mill
- Metal Telescoping Way Covers
- Fanuc 0i-MD 3-Axis CNC Control
- Programmable Flood Coolant System
- Full Enclosure with Front & Side Access
- Complete Operation Manual for Fanuc Control
Specifications:
| Model | KVR-2418 |
| Table Travel | 24" |
| Column Travel (Z-axis) | 18.1" |
| Saddle Travel (Y-axis) | 18.1" |
| Rapid Travel (x, y + z) | 1,417"/IPM |
| X, Y + Z Axis Feed Motor | 3.35 HP |
| Spindle Center to Column | 19.7" |
| Spindle Motor | 15 HP. 230V, 3 PH |
| Spindle Speeds | 10,000 RPM |
| Spindle Taper | CAT-40 |
| Spindle to Table | 3.9" - 22" |
| Max. Tool Diameter | 3" |
| Max. Tool Length | 5.9" |
| Max. Tool Weight | 12.1 lbs. |
| Tool Change Time | 3.7 seconds |
| Tool Holder | CAT-40 |
| Tool Storage Cap | 16 |
| Table Size | 18" x 28" |
| Max Cutting Feed Rate | 590 IPM |
| Max Work Load | 660 lbs. |
| Net Weight | 7550 lbs. |
| Shipping Weight | 8540 lbs. |
See all Kent Vertical Machining Centers
Kent Vertical Machining Center - 24" x 18" x 18" X/Y/Z
