Kurt Toolroom Vise
The Kurt Tool Room Vise is an extremely versatile vise that can fit on the smallest of machine tables to many mounted side by side using through the body mounting. This vise is also ground on all side to allow it to mounted that way using an optional toe clamp kit. This vise can also be used as a sine vise when using another vise as a receiver.
Features:
- The vise is fully chip guarded
- Mounting can be accomplished through the body or with outrigger toe clamps mounted to the outside of the body
- Four cavities in the ends of the body make mounting this vise with the toe clamps very quick and easy
- By using a receiver vise, this vise can be used as a sine vise with 30, 45 and 60° angles built into the side of the body on the stationary side. To utilize this feature, remove the triangular shaped magnets and place the dowel pins in the proper holes to get the angle you desire.
Tool Room Vise Specifications:
| Hex Size | 0.561" |
| JawHeight | 1.235" |
| Jaw Height to Step | 1.118" |
| Jaw Width | 3.470" |
| Base Height | 2.000" |
| Max. Clamp Force | 4500 lbs. |
| Max. Openning | 4.060" |
| Weight | 20 lbs. |
| Overall Length | 10.125" |
Accessories:
# KTR35CK - Clamp Kit
- Optional outrigger clamp kit to clamp your viseto table "T" slots.
# KTR35KK - Key Kit
- Optional Key kit to clamp your vise to tableusing the thruthebody mounting holes.
# KTR35TK - Toe Kit
- Optional Toe Clamp kit to clamp your vise on it's side to table.
