Kent Manual Engine Lathe - KLS-1860V
- 7.5 HP main spindle motor, 2 speed ranges with infinitely variable speed
- D1-8 camlock, 3.1” spindle bore
- Hardened and ground gears and bedways
- Jog button, multi-position feed stops
- Inch dials and leadscrews
- Centralized lube system in headstock
- Safety Foot brake
Standard Accessories
- 3-jaw chuck (10”), 4-jaw chuck (10”)
- Face plate (16”),Steady rest (3.5”), Follow rest (1-3”)
- 4-way tool post, thread chasing dial
- Coolant system, Full length splash guard
- Worklight, standard tools
Optional Accessories
- DRO system (Acu-Rite, Newall, etc.)
- DRO installation charge
- Aloris CA #4-set (tool post plus 6 bars)
- 5C lever style collet closer
- Royal spindle type live center (M.T. #5)
- BTC 3-jaw chuck w/back plate (Zero-set, 10” D1-8)
- BTC 3-jaw chuck w/back plate (Zero-set, 12” D1-8)
- Taper turning attachment
- Rustlick coolant (1 gallon, mixes 1:30)
| Model | KLS-1860V |
| Swing Over Bed | 18" |
| Swing Over Cross Slide | 10.8" |
| Swing Over Gap | 27.5" |
| Width of Bed | 13" |
| Distance Between Centers | 60" |
| Cross Slide Travel | 11" |
| Top Slide Travel | 4" |
| Spindle Speeds | 2 |
| Spindle Speed Range | 200-2000 RPM |
| Through Hole Diameter | 3.2" |
| Spindle Nose | D1-8 Camlock |
| Spindle Bore Taper | MT#7 with sleeve |
| Standard (Whit-Worth) | 62 (1-5/8 to 72) tpi |
| Metric Pitch | 28 (0.5 to 20) mm |
| Longitudinal Feeds | 0.0015"-0.0913" |
| Cross Feeds | 0.0006" - 0.0365" |
| Leadscrew Diameter | 1-9/16" |
| Thread Pitch | 4 TPI |
| Quill Travel | 5" |
| Quill Diameter | 3" |
| Quill Bore Taper | MT#5 |
| Main Motor | 7.5 HP (3 Phase) |
| Coolant Pump Motor | 1/8 HP (3 Phase) |
| Overall Dimensions | 112" x 40" x 50" |
| Weight | 6380 lbs. |
Kent Manual Engine Lathe
