Keller Washable Water Filters
Filters with Permanent, Washable Elements Clean Even the Dirtiest Water Supplies
Innovative Filter Element Design Gives You These Benefits:
- A quick wash restores the filter element to new condition
- Permanent elements quickly pay for themselves through savings in replacement cartridge costs
- No inventory of replacement cartridges needed
- Eliminate the problem and expense of disposing of contaminated filter cartridges
- Fit the permanent elements in your existing standard 10” & 20” filter housings without modification, or order from Keller’s complete line of filter assemblies
- Extremely high flow rates
Filter Water from Wells, Ponds, and Municipal Water Systems to Protect:
- Plant and laboratory water supplies
- Cooling water systems
- Boiler feedwater systems
- Water spray nozzles
- Maritime applications
Industries Served:
- Paper mills
- Plastic injection molding
- Food manufacturers
- Hospitals
- Municipal waste treatment
- OEM application
To Select the Filter Grade:
- Use the 40 mesh or 80 mesh (200 micron) grade when heavy solids loading is expected, or when only relatively coarse filtration is required - for example, in cooling water loops
- Use the 130 mesh (100 micron) grade to remove essentially all visible solids from the liquid.
- Use the 300 mesh (50 micron) grade to protect finer disposable filters or carbon cartridges
Specifications and Ordering Information:
How to Select the Correct Size Filter Assembly
Keller supplies filter systems for line sizes from 3/8" to 2", with flow capacities to 150 gallons per minute. To select the correct size Keller filter assembly, specify the filter assembly with port size equal to the size of the line on which it will be installed. The flow rate in the line will likely be less than the rated flow of the filter at 2 psi pressure drop (see chart below), and therefore the initial pressure drop will likely be less than 2 psi.
Filter Assembly | # 038A | # 075A | # XS102 | # S204 | # S205 |
Port Size | 3/8" NPTF | 3/4" NPTF | 1" NPTF | 2" NPTM | 2" NPTM |
Flow at 2 psi drop (gpm) | 10 | 25 | 50 | 110 | 150 |
Max. Press. (psig) | 125 | 125 | 300 | 150 | 150 |
Max. Temp. (°F) | 125 | 125 | 180 | 180 | 180 |
Materials: | |||||
Filter Elements | Polyethylene & polypropylene, EPR gaskets | ||||
Housings: Head | Polypropylene | Polypropylene | Brass | 304 SS | 304 SS |
Housings: Bowl | SAN* | SAN* | 304 SS | 304 SS | 304 SS |
No. Filter Elements | 1 | 1 | 1 | 4 | 4 |
Element Length | 5" | 10" | 20" | 10" | 20" |
Shipping Weight (lbs) | 3 lbs. | 5 lbs. | 13 lbs. | 26 lbs. | 34 lbs. |
* #038A and #075A also available with polypropylene bowl; substitute “B” for “A” in ordering information.
Elements to Fit Standard Housings:
Nominal Length | 5" Elements | 10" Elements | 20" Elements |
Sealing Length | 4-7/8" - 5" | 9-3/4" - 9-7/8" | 19-3/4" - 20" |
40 Mesh | R05-2040 | R10-2040 | R20-2040 |
80 Mesh (200 micron) | R05-2080 | R10-2080 | R20-2080 |
130 Mesh (100 micron) | R05-2130 | R10-2130 | R20-2130 |
300 Mesh (50 micron) | R05-2300 | R10-2300 | R20-2300 |