Kalamazoo Semi-Automatic Abrasive  Metallurgical saw - K12-14MS

12″ or 14″ abrasive wheel

Great for metallurgical  labs,  excellent finishes on sample sectioning, ferrous or non-ferrous material.

Keep dirt and coolant off your shop floor!  Semi-auto power down feed gives bright, clean cuts with controlled feed rates.

Removable side access panels for long parts.

• 5 HP, 3 PH 1725 RPM TEFC motor,CE, available in 50 hz and 575 volt.
• Semi-automatic air/oil power down feed.
• Adjustable feed rate 0-12 FPM, Momentary rapid override for rapid approach.
• Dual moveable 4″ screw vises.
• Capacity 2-1/2″ solid, 3″ shapes.
• Magnetic switch, low-voltage protection at switch, 24V.
• Internal halogen light – 24V.
• 1″ wheel arbor, 12″ or 14″ blade, (not included),  Optional 1.25″/32mm arbor.
• Dual coolant nozzles.
• 2200 spindle speed at 1725 RPM.
• Flood coolant, 10 gal., 1/3 HP.
• External Dimensions: L 43″ x W 26″ x H 60″.
• Internal Dimensions: L 43″ x W 24″ x H 22″.
• Table Dimensions: L 22″ x W 15″.
• Work Area: L 9.25 (with vises) x W 15″.
• Enclosed wet cutting metallurgical saw.
• Options:  Oscillation for large sections # OSC-18, door interlocks, T slot table # TS-14, X axis table,  stock conveyors
• 900 lbs.
• Made in USA!
• Model: K12-14MS