Kent Heavy Duty Lathe w/ NEWALL DP-700 DRO, 30" x 160" - HW-30160
with 4-1/2" Spindle Bore & NEWALL DP-700 Digital Readout Installed!
Features:
- Center sleeve
- Threading dial
- 15 HP Spindle Motor
- 12 speeds 10 - 1,000 RPM
- Solid full-length cast iron base
- Extra large 4-1/2" spindle bore
- 2-way power rapid traverse on Apron
- Hardened & ground gears and splines
- Extra wide range of inch/metric threading capabilities & adjustable feed carriage stop
- Precision rigid spindle with 3-point support
- Hardened & ground cross slideways & bedways
Complete with:
- Follow Rest
- 15" 3-Jaw Chuck
- Toolbox with Tools
- Manual & Parts List
- Roller Jaw Steady Rest
- 4-Position Carriage Stop
- 4-Way Indexable Toolpost
- Coolant System with Full Length Rear Splash Guard
- 2-Way Rapid Traverse on Apron
Specifications:
| Model | HW-30160 |
| Swing Over Bed | 30" |
| Swing Over Cross Slide | 21.3" |
| Swing Over Gap | 38.9" |
| Width of Bed | 15.75" |
| Distance Between Centers | 160" |
| Cross Slide Travel | 14.75" |
| Top Slide Travel | 8" |
| Spindle Speeds | 12 |
| Spindle Speed Range | 10-1000 RPM |
| Through Hole Diameter | 4.5" |
| Spindle Nose | D1-11 |
| Spindle Bore Taper | MT#7 |
| Thread – Inches Pitch | 44 (2-56) TPI |
| Thread – Metric Pitch | 39 (0.5-14) mm |
| Longitudinal Feed | 0.002"–0.032" in/rev |
| Cross Feed | 0.001"–0.0094" |
| Quill Travel | 6.5" |
| Quill Diameter | 3.3" |
| Quill Bore Taper | MT#5 |
| Main Motor | 15 HP |
| Coolant Pump Motor | 1/8 HP |
| Packing Dimensions | 252" x 47" x 76" |
| Net Weight | 11330 lbs. |
| Shipping Weight | 11775 lbs. |
Kent Heavy Duty Lathe w/ NEWALL DP-700 Digital Readout, 30" x 160"
