Features:
This one tool with the standard dies will produce a wide variety of bends on round, square or flat stock; radius bends to practically any size and on practically any material such as bar or flat stock; pipe or tubing, angle iron and hand rail capping; scrolls, lambs tongues and volutes for ornamental work. Set-ups can be changed in minutes because no tools are required. Bends can be repeated accurately by using stops provided for locating stock and limiting the swing or the bending frame. Optional hydraulic power isrecommended on heavy material. 1-1/4" thru 2" O.D. and 1 thru 2" schedule 40 pipe. 

Included With Bender Standard No. 2 HOSSFEL UNIVERSAL Bender (Includes #42015 instruction manual & #42019 VHS video cassette). Set of general-purpose tools for cold bending of schedule 40 pipe. Set of general-purpose tools for bending hot-rolled low carbon steel (AISI 1020) bar stock. Bulldozer type die for bending eyes and sharp bends on flat stock (Cap. 3/16 x 4-1/2"). Angle iron attachment for bending inward with 15" radius blocks (Cap. 2 x 2 x 3-16"). Angle iron attachment for bending flange outward with set of 5, 7, 18 and 24" radius blocks (Cap. 2 x 2 x 3-16"). 180° wrap around tube die set, 3/4" O.D. tube size x 2" centerline radius. Scroll die, single turn, 2-1/2" diameter scroll size (Cap. 3/8" x 1-3/4") (without spacers). 51B3 edgebend spacer set 1/4" size. Pedestal stand.

Bending Capacities Cold*

Sharp square flat bends:	1/4 x 4-1/2"
Heavy flat bars (1/2"R and up):	1/2 x 4-1/2"
Eye Bolts:	5/8"
Round corner "U" bolts:	1-1/4"
Sharp square "U" bolts:	5/8"
Square "U" bolts (1/2"R):	1-1/4"
Scrolls:	3/16 x 3/4"
Edgebend flats:	3/8 x 1-3/4"
Round or square eyes on flats:	3/8 x 4-1/2" hot
Angle iron flange outward:	2 x 2 x 3/16"
Angle iron flange inward:	2 x 2 x 3/16"
Standard pipe, all sizes:	1/4 thru 2" pipe size
Tubing, 16ga or heavier 2" R:	3/4" O.D.
Weight:	437 lbs.