General Tool Pin/Pinless Moisture Meter with Temperature and Humidity

The #MMH800 Pin/Pinless Moisture Meter with Temperature and Humidity is ideal for locating water leaks and measuring the moisture content of drywall, plastered walls, floors and subfloors.

Pin-type + non-invasive inductive moisture sensors
Two dedicated displays: Moisture percentage, and ambient temperature plus relative humidity (RH)
Audible and visual indications of high, medium and low moisture levels
°F/°C switch
Data hold
Auto diagnostic check
#PIND4E replacement pins are available
The pin cover doubles as a calibration checker
Battery charge indication
Auto power off

Moisture measurement ranges: 5 to 50%WME (Wood Moisture Equivalent) for wood; 1.5 to 33% for building materials
Moisture measurement accuracy/resolution: ±3% in pin mode/0.1%
Temperature measurement range/accuracy: 32° to 140°F (0° to 60°C)/±5.4°F (±3°C)
RH measurement range/accuracy: 25 to 95%/±5% below 75%RH; ±10% above 75%
Pin length: 0.28 in. (7mm)
Display type and size: 99.9 count LCD with 0.56 in. (15mm) high digits
Auto power off: After 3 minutes with 0% reading
Operating temperature: 32° to 122°F (0° to 50°C) @ <80% RH
Weight (without battery): 4 oz. (115g)
Power source: "9V" battery (included)

#PIND4E replacement pins
Custom hard plastic carrying case
Battery
1-year limited warranty