Flexbar Lexan Latheguards
Prevent Accidents With LATHEGUARD
Clear LEXAN, Semi-Circular Wrap-a-round Guards
- Heavy Duty Cast Mounting bracket supplied
- Heavy Duty Chrome-plated extension tube and hardware
- Ready to mount; all you do is affix mounting bracket with two screws
- Back of shield is reinforced with plated wire-form housing
- Locks in swing away or functional positions
- Accepts 3 or 4-Jaw Chucks
- Rib reinforced
- Robust construction
- Light in weight
- Swings away easily
Information and Specifications:
HINTS, FOR SELECTING THE CORRECT LATHEGUARD!
- The Chuck Diameter being used on your Lathe makes for a good formula
- Utilize Dimension "A" and other dimensions on chart shown on page 5 of our Safety Brochure. See Home Page for link to Safety Catalog.
- On Lathes with center heights of 7 inches or more there is a significant variation in the diameter of a 3-Jaw as against a 4-Jaw Chuck. It may be necessary to install the next larger Latheguard to accommodate for the 4-Jaw Chuck. Keeping a double bracket (No. 13071) on the Lathe makes it possible to switch your latheguard from small to larger size and vice versa, in one minute.
NEITHER RAZOR-SHARP CHIPS NOR BROKEN TOOLS BITS WILL PENETRATE THE LEXAN SHIELD
Specifications:
| Model No. | Suggested Lathe Size | Center Height (A) (Shield Height) | Use With Chucks | Shield Width (F) | Shield Length (B) | Tube Length (E) |
| 12999 | Very Small Lathes | 3.9” | Up to 6” Dia | 6-1/4” | 7.8” | 10” |
| 13060 | 6 to 12 | 6” | Up to 8” Dia | 6-1/4” | 11.8” | 10” |
| 13061 | 12 to 16 | 8” | Up to 12” Dia | 8” | 15.8” | 11 ½” |
| 13062 | 16 to 20 | 10” | Up to 16” Dia | 8” | 19.70” | 13” |
| 13064 | 20 to 24 | 13” | Up to 20” Dia | 8” | 23.6” | 13” |
