ACRA HIGH SPEED PRECISION ENGINE LATHE 16" X 60" - FEL-1660GCY
FEATURES:
- Digital Readout Installed
- One piece cast iron base with high rigidity.
- Gears in head stock are hardened and ground.
- All bed ways are hardened and ground.
- 3 bearing support for spindle for smooth turning at high speed.
- High spindle speed 33-2000rpm (16 steps).
- 7.5HP spindle motor.
- Apron and slideways are lubricated by one shot lubricator.
- Camlock D1-6 spindle with 52mm (2-1/32") bore.
SPECIFICATIONS:
| ITEM | FEL-1660GCY |
| Swing over bed | (16.1") |
| Swing over carriage | (10.2") |
| Swing over gap | (22.8") |
| Width of gap | (9.8") |
| Distance between centers | (60") |
| Width of bed | (10.8") |
| Spindle bore | (2-1/32") |
| Spindle nose | D1-6 |
| Taper of spindle bore & center | MT#6 |
| Number of spindle speeds | 16 steps |
| Spindle speed | 33 - 2000 rpm |
| Range of longitudinal feeds | (0.003 - 0.452 in/rev) |
| Range of cross feeds | (0.002 - 0.036 in/rev) |
| Range of inch pitches | 4 - 58 TPI |
| Range of metric pitches | 0.5 - 7mm |
| Quill stroke | (3.94") |
| Quill diameter | (2") |
| Quill taper | MT#4 |
| Main motor | 7.5 HP 220V/440V, 3 PHASE |
| Coolant pump motor | 1/8 HP |
| Height | 1700 mm (66.9") |
| Floor space | (89.8" x 45.3) |
| Net Weight | (3085 lbs.) |
Standard Equipment:
- Digital Readout Installed
- 3 Jaw scroll chuck: 8"
- Steady rest: 5"
- Follow rest
- Dead center: MT#4
- 4-position length stop
- Full length splash guard
- Coolant system
- Live center MT#4
- Center sleeve
- Chuck guard
- Operation manual/part list
Optional Equipment:
- Taper turning attachment
- 4 jaw independant chuck: 10"
- Face plate: 15-3/8"
- Turret carriage stop
- Micro saddle stop
ACRA HIGH SPEED PRECISION ENGINE LATHE 16" X 60"
