Earth Chain EZ Lift Lifting Magnets
Use the EZ-LIFT magnetic lifters to move plate steel, block or round steel, and iron material in your shop. Super-powerful "rare earth" neodymium iron boron magnet requires no electricity to perform material lifting. It’s perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc.
Features:
- Lifting Magnets rated for loads up to 6,600 lbs.
- "Rare Earth" lifting magnets tested to hold 3.5 TIMES the rated load for maximum safety
- Eliminates dangerous straps and slings
- Fast, safe & efficient material lifting, loading, and unloading
First center the lifting magnet on the material. Then, simply move the lever to the "ON" position to engage the lifting magnet.
Maximum rated load for magnetic lifting plate steel:
| Model | Material | Maximum Rated Load* |
| ELM-100 | plate steel | 220 lbs. |
| ELM-300 | plate steel | 660 lbs. |
| ELM-600 | plate steel | 1,320 lbs. |
| ELM-1000 | plate steel | 2,200 lbs. |
| ELM-2000 | plate steel | 4,400 lbs. |
| ELM-3000 | plate steel | 6,600 lbs. |
Maximum rated load for magnetic lifting round steel:
| Model | Material | Maximum Rated Load* |
| ELM-100 | round steel | 99 lbs. |
| ELM-300 | round steel | 300 lbs. |
| ELM-600 | round steel | 600 lbs. |
| ELM-1000 | round steel | 990 lbs. |
| ELM-2000 | round steel | 1,980 lbs. |
| ELM-3000 | round steel | 2,970 lbs. |
* Note: Material type and surface finish affect magnetic lifting power.
Dimensions (inches):
| MODEL | ELM-100 | ELM-300 | ELM-600 | ELM-1000 | ELM-2000 | ELM-3000 |
| A | 4.2" | 7.1" | 10.0" | 11.0" | 16.6" | 22.3" |
| B | 3.3" | 6.1" | 8.8" | 9.6" | 15.0" | 20.9" |
| C | 4.7" | 6.1" | 8.3" | 11.3" | 13.7" | 15.7" |
| D | 4.9" | 7.3" | 10.2" | 14.6" | 20.2" | 28.7" |
| E | 2.4" | 3.6" | 4.5" | 6.5" | 8.5" | 8.5" |
| F | 2.8" | 3.7" | 4.7" | 6.7" | 8.5" | 8.7" |
| G | 1.6" | 2.0" | 3.0" | 3.8" | 4.1" | 5.8" |
| H | 1.2" | 1.6" | 2.0" | 3.4" | 4.8" | 3.1" |
| WEIGHT | 5.5 lbs. | 18.9 lbs. | 46 lbs. | 101 lbs. | 259 lbs. | 399 lbs. |
