Diamond, Cross & Straight Knurling Tools for Turret Lathes
For Turret Lathes, Turret-Type Automatics and in the Tailstock of Center Lathes
Diamond Knurl Requires 3 Cutters 90°
Straight Knurl Requires 2 Cutters 30° Left and 1 Cutter 30° Right*
Cross Knurling requires 2 cutters 15° right and 1 cutter 15° left (on request).
*Knurling Cutters are not included.
Model | STR/A | STR/B |
Capacity | 0.16 - 0.98" | 0.20" - 2.17" |
Bore of knurling head | 0.78" | 1.38" |
Depth of bore | 1.00" | 1.46" |
Knurling head diameter | 2.13" | 3.75" |
Length of knurling head | 1.46" | 2.05" |
Length of wheel carrier | 0.59" | 1.18" |
Weight | 1.76 lbs. | 6.60 lbs. |
Specifications:
Part Number | Model | Shank H | Through Hole F | Cutter Dia |
72-094-6 | STR/A | 5/8" | 0.35" | 9/16" |
72-095-3 | STR/A | 3/4" | 0.35" | 9/16" |
72-096-1 | STR/A | 1" | 0.59" | 9/16" |
72-097-9 | STR/A | MT 2 | 0.33" | 9/16" |
72-100-1 | STR/B | 1" | 0.59" | 27/32" |
72-101-9 | STR/B | 1-1/4" | 0.71" | 27/32" |
72-102-7 | STR/B | 1-1/2" | 0.98" | 27/32" |
Click to see Knurling Cutters
Click to see Replacement Parts