Clausing Heavy-Duty, Large Capacity Radial Drill CL1600H
Features and Standard Equipment:
-
Equipped with hydraulic SEPARATE clamping unit. Vertical movement of arm is coordinated by an IC TIMER. With a single touch on push button switch, you can have arm unclamped then move vertically, or stop then clamp automatically. Very easy to operate, and tools will always stay at the same point after tool shifting.
-
Gears in gear box are cooled by oil cycled by an oil pump to minimize gear wear.
-
Friction type disc clutch absorbs impact force caused by vertical movement of spindle, and protects all transmission units inside gear box. With quick spindle return, the clutch will help speed-up the tapping operation.
-
Special automatic tool eject device is supplied to allow you to change tools quickly. (No drifter is required)
-
Special arm elevating device is provided to prevent arm from falling down abruptly after years of usage.
-
Coolant System
-
Tool kit and manuals
Specifications:
| Model | CL1600H* | ||
| Working Area | |||
|
| Column Sleeve Dia (E) | 17" (432mm) | |
|
| Column Face to Spindle Center | ||
|
|
| Maximum (D+C) | 62.2" (1580mm) |
|
|
| Minimum (D) | 17.3" (440mm) |
|
| Spindle Head Travel (C) | 44.9" (1140mm) | |
|
| Base Surface to Spindle End | ||
|
|
| Maximum (A) | 63" (1600mm) |
|
|
| Minimum (B) | 15" (380mm) |
|
| Arm Vertical Travel (A-B) | 33.5" (850mm) | |
|
| Arm Rotation (Right & Left) | 180° | |
|
| Baseplate Working Surface | 70.9"x 39.4" (1800mmx1002mm) | |
|
| Box Table Area | ||
|
|
| 27.6" (700mm) | |
|
|
| Width (K) | 19.7" (500mm) |
|
|
| Height (H) | 15.7" (400mm) |
|
| Base Dimensions | ||
|
|
| Floor Area (R x S) | 97.6"x41.3" (2480mmx1050mm) |
|
|
| Height (Q) | 8.26" (210mm) |
| Drilling Head | |||
|
| Spindle Taper | MT#5 | |
|
| Spindle Stroke | 14.6" (370mm) | |
|
| Quill Diameter | 3.94" (100mm) | |
|
| Number of Spindle Speeds | 12 | |
|
| Spindle Speeds (rpm) | 40-1920 | |
|
| Number of Steps | 6 | |
|
| Spindle Feed Rate (in(mm)/rev.) | 0.003"(.07mm)-0.038"(.96mm) | |
|
| Spindle Drive Motor (2-speed) | 7.5 hp (5.6 Kw) | |
|
| Elevating Motor | 2 hp (1.5 Kw) | |
|
| Clamping Motor | 1 hp (.75 Kw) | |
|
| Coolant Pump Motor | 1/8 hp (.10 Kw) | |
| Overall Measurements and Weight | |||
|
| Max. Machine Height (F) | 124.8" (3170mm) | |
|
| Base and Column Height (G) | 104.7" (2660mm) | |
|
| Shipping Dim. | ||
|
|
| Length | 112.2" (2850mm) |
|
|
| Width | 55.1" (1400mm) |
|
|
| Height | 115.7" (2940mm) |
|
| Net Weight | 10,141 lbs (4600kg) | |
|
| Shipping Weight | 11,243 lbs (5100kg) |
