Centroid CNC Touch Probe - DP-7

The DP-7 uses an advanced non-mechanical triggering technology. The DP-7 is an ultra accurate probe design that retains is accuracy even with a long styli. The DP-7 is also more accurate (talking tenths here) than the DP4 when using short styli as well. So to make a decision on which probe that fits your type of work; use the DP-7 for 3D/5D digitizing and probing work when ultra fine accuracies are required especially with a long styli.

DP-7 touch probe, outperforms mechanical probes with ten times better accuracy while using a 140 mm stylus.

The DP-7 is a high-accuracy digital touch probe that both automates CNC job set-up and can copy complex 3D part geometries using a CNC milling machine or machining center. The DP-7 drastically improves digitizing and measuring accuracy by eliminating the sources of error that affect conductive and mechanical switch type touch probes. Using CENTROID’s new sensing technology the DP-7 is neither a conductive or mechanical switch type probe and therefore is not affected by the limitations of those technologies.

DP-7 Probe with probing cycles Part #12432