Birmingham Long Bed Milling Machine with Powerfeed - BPV-B2V40F
- 10" x 54" table
- Variable speed
- N/ATB 40 or CAT 40 spindle
- 105mm hardened & ground chromed quill
- High grade meehanite casting
- Ground table T slots
- Box way on Y, Z axis
- Hardened & ground table & 3 axes ways
- X & Z axis AC inverter drive power feeds
- Turcite "B" coating on X/Y axis ways
- Class 7 precision spindle bearings
- Flood coolant system
- Safety handwheel on Z axis
- Base chip/coolant drop pan
- Auto lubrication with timer
- Low voltage halogen worklight
- Control panel w/electric cabinet
- Y, Z axis flexible rubber guards
Specifications:
| Table Working Surface | 10" x 54" |
| Table Load Capacity | 1,500 lbs. |
| Table T-Slot Size | 16mm x 3 |
| Longitudinal Travel | 30 1/2" |
| Cross Travel | 17 1/2" |
| Vertical Travel | 19 5/8" |
| Longitudinal Feeds | 0-7/8" - 33 3/4" inch/min. (var.) |
| Cross Feeds | (opt.) 0-7/8" - 33 3/4" inch/min (var.) |
| Vertical Feeds | 0-7/8" - 33 3/4" inch/min. (var.) |
| Quill Travel | 5" |
| Quill Diameter | 105mm (4.13") |
| Quill Feeds | 0.0015, 0.003, 0.006"/REV |
| Spindle Taper | NT/CAT 40 |
| Spindle Speeds Type | Variable |
| Spindle Speed (RPM) | 70-5000 |
| Spindle Motor | 5 HP |
| Longitudinal Motor | 1/2 HP |
| Cross Motor | (opt.) 1/2 HP |
| Vertical Motor | 1/2 HP |
| Coolant Pump | 1/8 HP |
Machine Dimensions:
| Overall Height | Head: 89 3/4", Column: 78" |
| Overall Depth | 59" |
| Overall Width | 71 1/2" |
| Overall Cross Way Width | 16 1/2" |
| Saddle Length | 26" |
| Table to Spindle | Min: 3 1/3", Max: 23 1/4" |
| Quill Center to Column | 18" |
| Column to Table | Min: 3 5/16", Max: 20 7/8" |
| Column to Handwheel | 42 1/2" |
| Head Swivel | Right & Left, Each 45 |
| Weight | 4000 lbs. |
Click to see all Birmingham Long Bed Milling Machines with Powerfeed
Bed Mill, 5 HP Inverter Drive 70-5000 RPM
