Birmingham Long Bed Milling Machine with Powerfeed - BPV-B2V40
- 10" x 54" table
- Variable speed
- N/ATB 40 or CAT 40 spindle
- 105mm hardened & ground chromed quill
- High grade meehanite casting
- Ground table T slots
- Box way on Y, Z axis
- Hardened & ground table & 3 axes ways
- X & Z axis AC inverter drive power feeds
- Turcite "B" coating on X/Y axis ways
- Class 7 precision spindle bearings
- Flood coolant system
- Safety handwheel on Z axis
- Base chip/coolant drop pan
- Auto lubrication with timer
- Low voltage halogen worklight
- Control panel w/electric cabinet
- Y, Z axis flexible rubber guards
Specifications:
Table Working Surface | 10" x 54" |
Table Load Capacity | 1,500 lbs. |
Table T-Slot Size | 16mm x 3 |
Longitudinal Travel | 30 1/2" |
Cross Travel | 17 1/2" |
Vertical Travel | 19 5/8" |
Longitudinal Feeds | 0-7/8" - 33 3/4" inch/min. (var.) |
Cross Feeds | (opt.) 0-7/8" - 33 3/4" inch/min (var.) |
Vertical Feeds | 0-7/8" - 33 3/4" inch/min. (var.) |
Quill Travel | 5" |
Quill Diameter | 105mm (4.13") |
Quill Feeds | 0.0015, 0.003, 0.006"/REV |
Spindle Taper | NT/CAT 40 |
Spindle Speeds Type | Variable |
Spindle Speed (RPM) | 70-5000 |
Spindle Motor | 5 HP |
Longitudinal Motor | 1/2 HP |
Cross Motor | (opt.) 1/2 HP |
Vertical Motor | 1/2 HP |
Coolant Pump | 1/8 HP |
Machine Dimensions:
Overall Height | Head: 89 3/4", Column: 78" |
Overall Depth | 59" |
Overall Width | 71 1/2" |
Overall Cross Way Width | 16 1/2" |
Saddle Length | 26" |
Table to Spindle | Min: 3 1/3", Max: 23 1/4" |
Quill Center to Column | 18" |
Column to Table | Min: 3 5/16", Max: 20 7/8" |
Column to Handwheel | 42 1/2" |
Head Swivel | Right & Left, Each 45 |
Weight | 4000 lbs. |
Click to see all Birmingham Long Bed Milling Machines with Powerfeed
Bed Mill, 5 HP Variable Speed