Birmingham 16" x 40" High Speed Precision Gap Bed Lathes - YCL-1640
- 7 1/2 HP
- One-Piece cast iron base
- 12 speeds from 25-2,000 RPM
- D1-6 Spindle with 2 9/32 inch bore
- 60 Kinds of inch threads from 112-2tpi
- Main spindle hardened and precision ground
- Bed made of fine grain high tensile cast iron
- Bedways induction hardened and precision ground
- Main spindle supported at 3-point by precision bearings
Standard Equipment:
- Follow Rest
- 14 inch Face Plate
- 7 1/2 inch Steady Rest
- 10 inch 3-jaw Chuck
- 12 inch 4-jaw Chuck
- Operation and Parts Manuals
- Coolant System
- Halogen Work Light
- Removable Gap
- 4-way Tool Post
- Thread Chasing Dial
- Hand Oil Pump for Ways
- Centers and Sleeve
- Tool Kit with Tools
- Automatic Kick-Out Longitudinal Carriage Stop
- Full Length Foot Brake
- Full Length Splash Guard
Specifications:
Max. swing over bed | 16-1/8" |
Max length of workpiece | 40" or 60" |
Max swing of carriage | 8-13/16" |
Max swing in Gap | 25-3/16" |
Width of bed | 11-13/16" |
Spindle nose | D1-6 |
Diameter of spindle thru bore | 2-9/32" |
Taper of spindle center | M.T.#6 |
Spindle speeds | 25-2,000 RPM, 12 steps |
Longitude feeds | .0011"-.633"/REV,42 kinds |
Cross feeds | .00033"-.01837"/REV,42 kinds |
Metric threads | 0.1-14mm,41 kinds |
Inch threads | 112-TPI,60 kinds |
Module threads | 0.1-7mm,34 kinds |
Diamentral pitch threads | 112-4DP, 50 kinds |
Max. travel of cross slide | 12-3/16 |
Max. travel of top slide | 5" |
Diameter of tailstock quill | 2-3/8" |
Taper of tailstock quill center | M.T. #4 |
Max.travel of tailstock quill | 4-13/16 |
Net weight | 4100(16"X40") 5100(16"X60") |
lowest cost lathe best price lathe lathe cheap engine lathe lowest cost economical lathe
Best prices lathe lowest priced lathe cheapest lathe low cost lathe lowest cost engine lathe precision lathe cheap
16" x 40" High Speed Precision Gap Bed Lathe