Birmingham 12" x 36" Geared Head Gap Bed Precision Engine Bench Lathe - YCL-1236GH
Hardened and ground bedways and splined shafts in headstock. 9 speeds all geared headstock from 60-1500 ppm. 1-1/2 H.P. Single Phase 220V motor. Floor Stand is included. Emergency stop button equipped on the front of headstock. Jog button for easy engagement and inclining spindle. Extra saftey switch shuts down machine entirely for changing belt or gear for threading cutting. Built in full size splash guard.
Complete with 6" 3-jaw chuck, 8" 4-jaw chuck, Dead Center, Change Gears, Chip Pan, D1-4 Back Plate, Reduction Sleve, Steady Rest, Follow Rest, 10" Face Plate, Full Length Splah Guard, and 4 way Tool Post.
Specifications:
| Swing over bed | 12" |
| Swing over carriage | 7" |
| Swing over gap | 17" |
| Width of bed | 8" |
| Distance between centers | 36" |
| Taper of spindle thru hole | 1-1/2" |
| Taper of spindle bore | MT5 |
| Number range of spindle speeds | (9) 60-1500 RPM |
| Spindle nose | D1-4 |
| Metric-pitch threads | 0.2 - 4.5 29 kinds |
| Whit worth threads | 4-112 40 kinds. |
| Range of longitudinal feeds | 0.0012-0.0311 40 kinds |
| Range of cross feeds | 0.0003937-0.0105 40 kinds. |
| Diameter of leadscrew | 7/8" |
| Pitch threads of leadscrew | 8 |
| Travel of tailstock quill | 4" |
| Diameter of tailstock | 1-1/4" |
| Taper hole of tailstock | MT No. 3 |
| Main motor power | 1-1/2 HP |
| Overall dimensions of lathe L x W X H | 70" x 29-5/8" x 50" |
| Net Weight | 1250 lbs. |
Click to view Owner's Manual - Part 1
Click to view Owner's Manual - Part 2
Birmingham 12" x 36" Geared Head Gap Bed Precision Engine Lathe
