Baileigh TS-1248P-36 Professional Cabinet Table Saw - BA9-1008082

When looking for a truly professional cabinet table saw, good capacity and power are a must. The TS-1248P is a 12" diameter blade table saw that is available in two different sizes. The TS-1248P-36 has a 36" right side rip capacity, while the TS-1248P-52 has an extension for 52" right side rip capacity. Both run on 220 volt single phase 5 HP motor that produces 3600 RPM. Because of the extra power the TS-1248P has a 1" arbor that tilts 45 degrees to the left. To make operation even easier the bevel has a digital readout for increased accuracy.

Another unique feature of the TS-1248P series is the rip fencethat incorporates a digital readout for rip capacity. Just "zero" the DRO at the blade and away you go. No second guessing the length of cut. The table and extensions for the TS-1248P are made from precision ground cast iron. These tables are placed upon a super rigid all steel base for accurate alignment. The other standard features to the TS-1248P series are: miter gauge, standard and dado inserts, deluxe rip fence and 4" dust collection port.

This 680-pound industrial table saw can cut thousands of board feet per day and make angles that fit perfectly. The steel base, massive trunnion and cast iron tablemaintain accuracy.

• 36" right-side rip capacity.
• Also available with a 52" rip capacity.)
• 5 hp motor turns at 3,600 rpm.
• Accepts standard 12" blades with a 1" arbor that can tilt 45° to the left.
• Runs on 220-volt single-phase power, so it’ll work almost anywhere.
• 48" x 30" work table with 36" extensions.
• Both the table and its extensions are made from precision-ground cast iron.
• Table surface will stay square because of webbed or criss-cross design on the bottom that meshes into the base.
• The tabletop won’t warp in spite of heat and moisture.
• Smoothly finished table allows wood to slide without resistance. There's no unevenness to compromise the accuracy of your cut.
• You can polish the cast-iron table up and restore the original shine even after years of hard use.
• Rip fence incorporates a digital readout (DRO) for rip capacity.
• Just "zero" the DRO at the blade to get a perfect, repeatable length every time.
• Steel handwheels, for adjusting blade height and miter angle, are located on the base.
• Rack and pinion mechanism makes it easy to move the blade up and down.
• Comes with a simple miter gauge on the tabletop and DRO for the bevel angle on the base to help with repeatability.
• Massive steel trunnion is attached to the base, so the machine won’t wobble or exceed safe noise levels.
• Rigid all-steel base maintains accurate alignment and keeps vibrations down to a minimum.
• Dust shroud inside the machine collects sawdust from under the blade and funnels it to the 4” port. Just hook up an extraction system.
• CSA-approved.
• 4-piece safety blade guard with anti-kickback reverse teeth.
• Includes both a splitter and riving knife to help spread the wood and prevent pinching or twisting.
• Covered by a 1-year parts warranty.
• Baileigh's team of reps (all with hands-on machine experience) will provide lifetime technical support by phone.

Specifications: