Baileigh IP-2509-HD Numerically Controlled Planer - BA9-1004942

The IP-2509-HD is the ultimate in numerically controlled planers. This industrial 25" planer has a 10 HP single phase motor that makes sure you never run out of power even when planing full 25" boards. Another advantage of the single phase power it that is will run in almost any shop without much problem. Because of the 10 HP motor, the IP-2509-HD can take 1/4" of material at one time by spinning it spiral head cutter at 5000 RPM. The table of the IP-2509-HD is 25" x 32", but also has cast iron excretions that make the overall table size a large 25" x 57".

Many special features help make this the best on the market in its size. Oversized bearing housings ensure ultra-smooth, quiet performance and long life. Instead of only two speeds like most of the other planers on the market, the IP-2509-HD variable speed of 20 to 30 feet per minute meaning you will have the exact speed required. Another feature not normally found in this class is the standard PLC control which allows you to simply enter in the desired height and the bed moves automatically to that setting. You'll never want to go back to turning a hand wheel to find your thickness. The controller on the IP-2509-HD planer also has automatic backlash compensation ensuring exact thicknesses.

Designed for fast, consistent, low-effort production, this 25" industrial planer lets you set the bed height through a programmable logic controller. No more turning a handwheel to find your thickness!

• 10 hp motor has enough muscle to smooth full 25" boards.
• Spiral cutter head (included) spins at 5,000 rpm.
• Rows of rotatable carbide blades make the spiral cutter head last much longer and work more quietly than a straight-knife cutter.
• Runs on 220-volt single-phase power, so you can use this sophisticated machine in almost any shop.
• Can smooth off up to .25" of material at one time.
• Variable speed from 20 to 30 feet per minute, so you can finetune to get the exact speed you need for your material and finish.
• 25" x 32" main cast iron table expands to an even larger 25" x 57", supporting your material and helping you create straight, smooth boards.
• Programmable controller makes it simple to set the height. Just enter what you want, and the bed automatically moves to that setting.
• Controller includes automatic backlash compensation to produce exact, repeatable thicknesses.
• Segmented steel infeed roll allows you to smooth multiple boards with different heights at once, increasing your productivity.
• Durable dual steel outfeed roll moves boards along to the cutting head.
• You can set the quick-adjust bed rolls high to reduce friction on rough-sawn stock, or adjust them lower for straighter, smoother results.
• Segmented chip breaker prevents large chips or strips of wood from clogging up the machine or your dust collector.
• Solid iron pressure bar applies even force across the boards to avoid chipping.
• Anti-kickback fingers grip the material so it’s less like to shoot back out if there’s a problem at the cutter head.
• Oversized bearing housings ensure quiet performance and long life.
• Covered by a 1-year parts warranty.
• You can rely on lifetime technical support by phone from Baileigh woodworking experts, all of whom have used their machines and know them top to bottom.

Specifications: