Baileigh DP-1000E Belt Driven Metal Drill Press - BA9-1022128
This economical belt driven drill press runs smoothly even at full capacity - the DP-1000E is a 15-1/2" drill press with an MT2 Taper that lets you run tooling at the proper speed to fit your application with its 5 speed pulley configuration which helps extend tooling life.
- .5 hp motor requires 110 volt power and will work at any shop or site.
- Belt driven head drills a maximum capacity of 1" steel.
- 5 speeds in the range from 250 to 2900 rpm to suit your application.
- 3-1/8" steel column eliminates flexing even when drilling at full capacity.
- Rigid cast iron base and table add strength to the drill’s structure.
- Includes a safety shield around the drill head to protect you.
- Baileigh backs this drill press machine with a 1-year parts warranty and lifetime technical support by phone from their experienced team.
Specifications:
| Part Number | DP-1000E |
| Stock Number | BA9-1022128 |
| Swing | 15-1/2" |
| Diameter of Column | 3-1/8" |
| Spindle Travel | 3" |
| Base Size | 23" x 16" |
| T-Slot Width | 1/2" |
| Table Size | 12-1/2" x 12-1/2" |
| Speeds | 5 |
| Quill Diameter | 2" |
| Spindle Nose to Table | 5-1/2" Min. To 35-1/2" Max. |
| Spindle Nose to Base | 47-1/2" |
| Spindle Taper | MT2 |
| Table Angle Adj | 360° |
| Main Motor | 1/2 hp |
| Rpm | 250, 700, 1150, 1900, & 2900 |
| Drill Capacity Steel | 1" |
| Power | 110 Volt |
| Shipping Weight | 290 lbs |
| Special Notes | B-16 1-16mm Keyless Chuck, MT2 to B16 Arbor, Drift Key |
| Certification | CE |
| Shipping Dimensions | 60" x 44" x 21" |
Baileigh DP-1000E Belt Driven Metal Drill Press
