Mitutoyo HH-411 Impact Type Portable Hardness Testing Unit - 810-298-10
HH-411 is a compact portable hardness tester that is user-friendly. A single touch of a button performs the non-destructive impact hardness test so it's extremely easy to test workpieces on site.
This is a lightweight, digital-reading portable hardness testing instrument for metal workpieces.
The Hardmatic HH-411 offers you the following benefits:
- It operates on the rebound hardness principle (standardised according to ASTM A 956)
- Measurement is conducted with hardness value L (Leeb-value) but you can convert to any desired hardness scale
- The display automatically shows GO/±NO GO with the tolerance function set and selected
- It has a memory function for 1800 measured values, and automatic measuring direction angle-compensation.
- Expak software gives you simple data collection 11AAC238
User-friendly
- To make a hardness test, just press the button on the impactor while holding it against the workpiece surface. It is easy and user-friendly.
Hardness testing on narrow surfaces is possible
- Only a small surface area is needed for testing hardness with the HH-411. (A small ø22mm for the standard type D impactor, and a minute ø4mm for the optional type DL impactor.) This feature makes the HH-411 extremely useful for testing the hardness of surfaces such as structural elements, gear teeth, etc.
A choice of impactor
- D type: Standard, general purpose type
- DC type: For inner walls of pipes
- D+15 type: For bearings and gears
- DL type: For narrow features such as small gear teeth and welded corners
Equipped with data storage function
- A maximum 1800 data entries of hardness test results can be stored. This function is very useful for routine tests at work sites
Unit of hardness is selectable for various purposes
- The HH-411 produces HL hardness scale results (L hardness: conforming to ASTM A 956), automatically converting to Vickers, Brinell, Rockwell C, Rockwell B, Shore and tensile strength, as required during testing.
Equipped with auto angle compensation function
- Impact-type hardness measurements are normally affected by gravity, depending on the angle at which the impactor is held, but the HH-411 is equipped with the latest measuring technology that automatically recognizes impactor orientation and compensates for this effect so maximum accuracy is realized in every measurement.
Specifications:
Order No. | 810-298-10 (ASTM Type) |
Model | HH-411 |
Impactor | Impact hammer with integrated detector and carbide-ball tip (D type: conforming to ASTM A 956) |
Display unit | 7-segment LCD |
Display range | Leeb: 1-999HL Resolution 1HL| Vickers: 43-950HV Resolution 1HV Brinell: 20-894HB Resolution 1HB Rockwell C: 19.3-68.2HRC Resolution 0.1HRC Rockwell B: 13.5-101.7HRB Resolution 0.1HRB Shore: 13.2-99.3HS Resolution 0.1 HS Tensile strength: 499-1996MPa Resolution 1MPa (Display range depends on conversion table.) |
Functions | Auto Angle Compensation Function, Offset function OK/NG judgment function, Conversion function Data storage function: 1800 data entries Statistical analysis (Average, Maximum, Minimum, Dispersion) Auto sleep function, Impact counter display function |
Testable workpiece limits | Minimum 5mm or more in thickness and 5kg or more in mass (When the sample mass is 0.1kg or more and less than 5kg, fix it against a larger mass to make it testable.) Test points: 5mm or more from the edge of the sample, 3mm or more to each of the tested points. Surface roughness of samples: Ra 10m or less |
Output | RS-232C, SPC (each 1 output, simultaneous output is possible) |
Power supply | Alkaline AA battery 2pcs (battery life: approx. 70 hours) AC adapter (optional accessory) |
Operating environment | Temperature: 0°C to 50°C Humidity: less than 95% without condensation |
Size / Mass | Display unit: approx. 70 x 110 x 35 mm, 200g, Impactor: approx. ø28 x 175 mm, 120g |
Standard Configuration (included with #810-298-10):
Order No. | Description | Remarks | Qty |
810-291-10 | Display unit UD-410 | HS conversion : HSD (ASTM) | 1 |
- | LR6 battery | Lithuim Battery | 2 |
99MBG600B | User's manual | - | 1 |
810-287-10 | Impactor UD-411 | D type, approx.ø28 x 175mm, 120g (tip: ø22mm) | 1 |
- | Impact hammer | - | 1 |
19BAA457 | Carbide ball | Built-in to the impact hammer | 1 |
19BAA459 | Wrench | - | 1 |
19BAA460 | Cable for detector | - | 1 |
19BAA451 | Support ring | ø22mm | 1 |
19BAA452 | Support ring (small) | ø14mm | 1 |
19BAA258 | Brush | - | 1 |
- | Case | For the display unit and impactor | 1 |
11AAD240 | Hardness test block | - | 1 |
- | Case | For hardness test block | 1 |
- | Inspection Certificate | - | 1 |
11BAB687 | Handle | - | 1 |
11BAC437 | Strap | - | 1 |
See all accessories for the Mitutoyo HH-411 Impact Type Portable Hardness Testing Unit