JET JTM-1050EVS2 Milling Machine w/ X-Axis Powerfeed & 3-Axis Acu-Rite 200S DRO - 690629
Durability:
- Certified Meehanite® Castings
- Class 7 bearings support the spindle for maximum ridgity in heavy cutting applications
- Precision bored and honed milling head
- Spindle head is internally cooled extending bearing, belt and motor life
- Quick spindle feed nut easily adjusts to different depths
- One-piece quill pinion and shaft
- Three-stage power downfeed with automatic stop
- Heavy-duty spindle brake
- Precision hardened and ground ways and table
- Turcite-B on X and Y-Axis
- Adjustable gibs throughout
Safety:
- For added safety, the JTM-1050EVS2 follows strict guidelines and electrical requirements to be certified by CSA Group
- Swing away spindle guard
- L.E.D. work lamp
- Internal coolant tank built into casting base
Ease of Use:
- Automatic Lubrication every 30 minutes with a flow of 3-6cc reduces maintenance
- Inverter Drive System and emergency stop located on a swing away control arm moves all major funtions within the operators reach
- JET exclusive new casting provides an easier solution to leveling the machine without raising it off the floor
- Two 115V outlets on electrical box for DRO or Powerfeeds
Standard Equipment:
- Spindle Safety Guard
- Halogen Machine Lamp
- Dual locks on all moveable surfaces
- Chip pan
- Way covers
- Draw bar
- Tool box with tools
Specifications:
| Model | JTM-1050EVS2 |
| Item Number | 690629 |
| Table Size (L x W) | 10" x 50" |
| Digital Readout | ACU-RITE 200S |
| Number of Axis | 3 (Quill) |
| Spindle Taper | R-8 |
| Quill Diameter | 3-3/8" |
| Number of Spindle Speeds | Variable |
| Range of Spindle Speeds (RPM) | 60 - 4,500 |
| Quill Down Feed Rates (IPR) | .0015 - .003 - .006 |
| Quill Travel | 5" |
| Head Movement (Deg.) | 90° R & L, 45° F & B |
| Max Distance Spindle to Table | 20-3/4" |
| Distance Spindle to Column (Max.) | 26-3/4" |
| Distance Spindle to Column (Min.) | 4-3/4" |
| Collet Capacity | 1/8" - 7/8" |
| Table Longitudinal Travel | 29-7/8" - 35-1/3" |
| Table Cross Travel | 14-3/4" |
| T-Slots Number and Size | 3" and 5/8" |
| T-Slot Centers | 2-1/2" |
| Work Table Weight Capacity (Lbs.) | 840 |
| Travel of Knee | 16-1/8" |
| Travel of Ram | 15-7/8" |
| Saddle Width (In.) | 11-1/2" |
| Column Width (In.) | 20" |
| Inverter Type | Delta, B |
| Motor (HP) | 3 HP, 230V, 3-Phase |
| Overall Dimensions (L x W x H) | 66" x 63" x 86" |
| Weight (Lbs.) | 2860 |
JET JTM-1050EVS2 Milling Machine
