Mitutoyo Absolute Digimatic Scale Unit, Series 572, Vertical, 8"/200mm - 572-592-10

• The ORIGIN key allows setting of an absolute zero point to be used as reference in subsequent measurements. Once set, the ABS Digimatic Scale Unit is ready to show its true position whenever turned on rather than 0.00” as with standard models.
• The ZERO/ABS key allows the display to be zero-set at any slider position along the beam for incremental comparison measurements. This key will also allow return to the absolute coordinate with a display of the true position from the origin point.
• No rack, no pinion, no glass scale. Digimatic Scale Unit is safely embedded in the hardened stainless steel blade.
• Horizontal or vertical face according to the scale mounting direction.
• Special type that is provided with diameter displaying function is available for lathes.
• All units come with two mounting brackets, each located at either end of the scale.
• With SPC data output.

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.01mm or .0005"/0.01mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder
• Max. response speed: Unlimited
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 3.5 years under normal use
• Resolution: .005" / 0.01mm

Function:

• Origin-set, Zero-setting, Power on/off, Presetting, Data hold, Data output, inch/mm conversion (oninch/metric models only), Counting direction switching*
• Alarm:Low voltage, Counting value composition error
• *not available for single function models

* Vertical multi-function (equipped with double reading function)

See all Mitutoyo Absolute Digimatic Scale Units, Series 572