Mitutoyo Bore Gage for Blind Holes, 1.4 - 2.4" w/ 2923SB-10 indicator - 511-439
Series 511
New model measures blind-hole diameter with high accuracy and high durability
Features:
- Capable of ID (inside diameter) measurement close to the bottom of a hole
- Pendulum guide structure improves sliding
- Carbide contact faces for durability
- Grip is large and hollow to reduce effect of body heat on high-accuracy measurements
- Extension rods (optional) can be attached for measuring deep holes
- A Bore Gage Checker and a range of Setting Rings are available to aid in accurately setting the gage before making a measurement.
- Alternate indicators may be used in place of those recommended*
* Some indicators and protection covers cannot be used with these bore gages. Contact us if considering the use of Dial or Digimatic indicators other than the recommended models.
Specifications:
| Order No. | 511-419 | 511-429 | 511-439 | |
| Measuring range | 1.4 - 2.4" | |||
| Indicator included | - | 2922SB | 2923SB-10 | |
| Accuracy | Wide-range accuracy | 0.00016" | ||
| Repeatability | 0.00004" | |||
| Adjacent error | 0.00004" | |||
| Effective stroke of contact rod | 0.047" | |||
| No. of anvils | 6 | |||
| No. of replacement washers | 4 | |||
Notes:
1. A 10mm (.4") sub-anvil is supplied with 511-415/425/435/418/428/438 and a 50mm (2") sub-anvil is supplied with 511-417/ 427/437/420/430/440.
2. It is not permissible to use a sub-anvil other than the standard accessory, or widen a measuring range by using multiple sub-anvils.
(The measurement accuracy in such cases is not guaranteed.)
Mitutoyo Bore Gage for Blind Holes
