Scotchman Semi Automatic Saw CPO350PKPD
Standard Features
- Semi-Automatic Cycle
- Air-operated clamp for material vise
- Pneumatic Power Down Feed with Electric Controls
- Power Double Self-Centering Vise Assures Burr-Free Cuts
- Emergency Stop Button
- Miter Capabilities 45 degrees Left and 45 degrees Right
- Miter Locking Devise: quick, accurate setting-stops at 45 degrees Left, Straight 90 degrees, and 45 degrees Right
- Capable of Slotting
- Two Cutting Speeds
- Double Reduction, Hardened and Ground Worm and Wheel Gear Box
- Worm Wheel of Top Quality Bronze
- Chip Drawer
- 7 Gallon Coolant Tank with Pump
- One 12-1/2" Diameter (315 mm) HSS Blade
- One Blade Wrench
- One Gallon Concentrated Coolant
- 230 or 460 Volt /3 Phase Electrics (must specify voltage)
- Warranty: Three Years
- Made in USA
- For Optional Standard Tooling please Contact Us
| Cutting Speeds | Must Specify when Ordering | |
| LT(Low Turn) designed for solid mild steel, solid stainless steel & thick wall pipe | LT (Low Turn) 22 rpm / 44 rpm | Motor rate: 3 hp |
| HT(High Turn) designed for thin wall tube .060 wall thickness or thinner and non-ferrous material | HT (HighTurn) 44 rpm / 88 rpm | Motor rate: 2.5 hp |
| VS (Variable Speed) ~ wired 230/460, 3-ph | VS (Variable Speed) 11 / 177 rpm | Motor Rate: 5 hp |
| VS (Variable Speed) ~ wired 220, 1-ph | VS (Variable Speed) 11 / 120 rpm | Motor Rate: 3 ph |
| SS (Single Speed) designed for 220v 1ph applications | SS (Single Speed) 44 rpm | Motor Rate: 3 hp |
| TUBING Round Square Rectangle SOLID Round Square | 90 Degree 4-1/2" 4-1/4" x 4-1/4" 5-1/2" x 4" 90 Degree 2" 2" x 2" | 45 Deg 4" 4" x 4" 4" x 4" 45 Deg 1-3/4" 1-3/4" x 1-3/4" |
| Factory Wired | Specify 208 3 ph 230 3 ph 460 3 ph 575 volt 3 ph 60 hz 220 volt 1 ph 60 hz (SS model only) | |
| Maximum Diameter Blade | 14" | 350 mm |
| Arbor Bore | 1-9/16" | 40 mm |
| Pin Spacing | 4/12/64 | |
| Width | 21-7/8" | |
| Depth | 43-1/2" | |
| Height not including handle | 56-1/4" | |
| Height from floor to vise | 37-7/16" | |
| Shipping Weight | 675 lbs. |
Low Turn Semi Automatic Saw CPO350PKPD
