Precise 2" Range Calibrated DPS Electronic Indicator - 303-3505C

• ISO17025 Certificate Calibrated in the USA
• Definitive Position Sensor (DPS) displays the absolute, true coordinate from the origin point and it keeps tracks of the origin point even in power-off mode. Once the origin point is set, there is no need to repeatedly perform a zero setting operation at power-on which provides a quick and easy, ready to use operation and no more concern for overspeed errors
• Indicator can be purchased with an ISO 17025 calibration certificate which are calibrated in the USA by an ANAB accredited ISO17025 calibration lab that offers free online calibration management solutions
• 7 Function keys: Origin Setting, Preset, TOL, ABS/Zero, inch/mm, +/-, On/Off
• Preset function key allows indicator to preset to any master value and it will take measurement starting from the preset value
• Tolerance function key: Go/No-Go tolerance check can be performed by setting the upper and lower limit. The measurement taken will accompany with "<", "o", or ">" arrow to indicate if it's within the tolerance
• Spindle's up/down movement can be easily toggled by setting the positive/negative count (+/-) key
• Auto shut off after 5 minutes and retain current position without sliding caliper; By sliding the caliper would activate the digital display
• Digital face can be rotated 330 degree to assist in easy reading position
• Dust & water drop resistance conforming to IP54 level
• Optional SPC interface cable is available to transmit data directly into an Excel file with a push of button on the interface device without installing any additional software drivers
• Energy efficient integrated circuit design enables extended battery life > 1 year using 3V CR2032 lithium battery
• Contact point is made out of ceramic ball tip for durability
• 3/8" stem diameter with 4-48 thread contact tip
• Manufactured by an ISO9001 certified manufacturer
• 1 Year limited warranty

For More Precise DPS Electronic Indicators Click Here