TMX28CNC Taiwan Built Manual Plus CNC Lathe, 28" Swing - 28CNC-117
Features:
- 28" swing over bed x 117" bc
- Fanuc or Fagor controls operate in Semi-Manual, Automatic Cycle or G-Code modes (option)
- 15/21 HP main drive with CSS and 3-range autoshifting headstock
- 4.1" or 5.1" spindle bores with speeds up to 2000 RPM
- 16" wide TRI-V bed design
- Independent swivel control station
- Load capacity up to 4,600 lbs bc
- Tailstock with 4.1" diameter quill, wrap around body and come-along
- Easy operator’s controls, 4-way rapids, Americanized electronics and absolute encoders
- Separate hydraulic power system for optional hydraulic chucks and steady rests
- Wide range of options including power turrets, hydraulic chucks and steadies, chip conveyor, nesting doors, etc.
Specifications:
| Capacity / Model | 28" TMX28CNC |
| Swing Over Bed | 28.2" |
| Swing Over Cross Slide | 18" |
| Distance Between Centers | 117" |
| Max. Workpiece Weight in Chuck | 880 lbs |
| Max. Workpiece Weight bc | 4,600 lbs |
| Headstock | |
| 3-Range Autoshifting | Automatic |
| 4.1" Spindle Bore, Std. | 4-2000 RPM |
| 5.1" Spindle Bore, Option | 4-1500 RPM |
| Spindle Nose, Std. 4.1"Bore | D1-8 |
| Spindle Nose, Option 5.1" Bore | D1-11 (Dual Option) |
| Main Drive Power, Std. | 15 HP Continuous / 21 HP at 40% Duty |
| Main Drive Power, Option | 18 HP Continuous / 25 HP at 40% Duty |
| Carriage | |
| Cross Slide Travel, X-axis | 15.7" |
| Rapid Travels, Z and X axes | 275 IPM |
| Feed Thrust, X / Z axes | 1,840 lbs / 2,000 lbs |
| Ball Screw Diameter, Z-axis | 1.96" (50mm) |
| Ball Screw Diameter, X-axis | .98" (25mm) |
| Carriage Length Bearing on Ways | 22.3" |
| Cross Slide Width | 8.46" |
| Tailstock | |
| Quill Diameter | 4.1" |
| Quill Taper | MT5 |
| Quill Stroke | 7.8" |
| General | |
| TRI-V Bed, width | 16" |
| Machine Length | ~ bc + 74" |
| Machine Weight, 77" bc | 11,100 lbs |
See all TMX28CNC Taiwan Built Manual Plus CNC Lathes, 28" Swing
TMX28CNC, Distance Between Centers: 117"
